G 2500 3/4 Ton Van V8-350 5.7L VIN K TBI (1995)
3. Disconnect the body wire harness connector (the larger connector) located on the right side of the remote keyless entry module (See Figure 1).
4. Crimp a 12034046 terminal to a 20 ft (7m) length of light blue 18 gauge (0.8 mm) wire and insert into the vacant "H" cavity of the connector.
5. Reconnect the body harness to the remote keyless entry module. E94 ONLY Remove door sill plate, stepwell pads and rear quarter trim panel.
6. Route wire under carpet along floor panel and secure with duct tape.
7. Locate body harness/power door lock motor harness connector at the right "D" pillar.
