G 2500 3/4 Ton Van V8-350 5.7L VIN K TBI (1995)
8. Crimp a 12047787 terminal to the light blue 18 gauge (0.8 mm) wire.
9. Remove the tan wire terminal from the "A" cavity of the body harness connector, remove the terminal and tape back the wire.
10. Insert the light blue 18 gauge (0.8 mm) wire terminal into the "A" cavity of the body harness connector.
11. Reconnect body harness to the power door lock motor harness.
12. Connect negative battery cable.
13. Reinstall the keyless entry module.
14. Check and verify proper operation of the circuit.
15. E94 ONLY Reinstall door sill plate, stepwell pads and rear quarter trim panel.
PARTS INFORMATION
Parts are currently available from GMSPO.
WARRANTY INFORMATION
For vehicles repaired under warranty, use:
Labor Operation
Description Labor Time
Module Replace Use Published
N4821
Automatic Door Labor Operation
Locking System Time
