gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Outside Handle|Page 10302 > < Body - Vehicle Glass Distortion Information|Page 10296
Page 1
background image

Rear Door Handle: Service and Repair
Outside Handle

Remove Or Disconnect

1. Door trim panel.
2. Door to outside handle screws (522).
3. Handle from the door.
4. Gaskets from the door.

Install or Connect

1. Large gasket into the handle.
2. Door to outside handle screw (522) to the push button side of the handle.

^

Do not tighten.

3. Small gasket between the door and the handle.
4. Door to outside handle screw (522) to the other side of the handle.

^

Tighten both screws.

5. Door trim panel.

Outside Handle|Page 10302 > < Body - Vehicle Glass Distortion Information|Page 10296