G 2500 3/4 Ton Van V8-350 5.7L VIN K TBI (1995)
Rear Door Latch: Service and Repair
Control Assembly
Remove or Disconnect
1. Door trim panel.
2. Upper and lower door latch rods from the control assembly.
^
Using flat bladed screwdriver, push on the top of the clip where it is connected to the rod. Pivot the clip away from the rod.
3. Electric door actuator (if equipped).
4. Door to control assembly bolts (520).
5. Control assembly through the access hole.
Install or Connect
1. Control assembly through the access hole.
