gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Powertrain Control Module (PCM) Replacement|Page 3815 > < Powertrain Control Module (PCM) Replacement|Page 3813
Page 4
background image

    
FUNCTIONAL CHECK

1. Turn ignition "ON."
2. Enter diagnostics.

A. DTC 12 should flash four times (if no other DTC(s) are present). This indicates the PROM (MEM-CAL) is installed properly, and the PCM is

functioning.

B. If DTC 51 occurs, or if the MIL is "ON" constantly with no DTC(s), the PROM (MEM-CAL) is not fully seated or is defective.
C. If not fully seated, press firmly on the ends of the PROM (MEM-CAL).
D. If it is necessary to remove the PROM (MEM-CAL), follow the previous removal instructions.

CAUTION:  To prevent possible Electrostatic Discharge damage to the PROM (MEM-CAL), Do Not touch the component leads, and Do Not
remove integrated circuit from carrier.

Powertrain Control Module (PCM) Replacement|Page 3815 > < Powertrain Control Module (PCM) Replacement|Page 3813