gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Other Service Bulletins for PROM - Programmable Read Only Memory:|536508 > < A/T - No Upshift After Cold Start, Intermittent DTC 87|Page 6169
Page 5
background image

Check the PCM for a current or history DTC 87. If DTC 87 is present, refer to the appropriate Service Manual for diagnosis of DTC 87. Refer to
corporate bulletin # 577115 for additional information on diagnosing DTC 87. If the diagnosis fails to lead to a resolution and DTC 87 only sets after a
cold start, replace the EPROM. Refer to the appropriate Service Manual for EPROM replacement. It is a good idea to verify the new EPROM I.D. with a
scan tool against the application listed below.

The service EPROM raises the DTC 87 shift time parameter to 4 seconds and the code enabling temperature to 20°C (68°F).

Parts Information

Important: 

In 1994, the L65 and L56 engines changed fuel injection pumps that required a new EPROM. The current fuel injection pump will service prior
models. Be sure to match the EPROM with the proper engine fuel injection pump.

Parts are currently available through GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Labor Time

J6364

Use published labor

operation time.

All Other Service Bulletins for PROM - Programmable Read Only Memory:|536508 > < A/T - No Upshift After Cold Start, Intermittent DTC 87|Page 6169