gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Rear Suspension - Loud Noise On Bumps|Page 9184 > < Rear Suspension - Loud Noise On Bumps|Page 9178
Page 1
background image

Suspension Spring ( Coil / Leaf ): All Technical Service Bulletins
Rear Suspension - Loud Noise On Bumps

File In Section: 3 - Steering/Suspension

Bulletin No.: 56-34-02

Date: April, 1995

Subject:
Leaf Spring U-Bolt Anchor Plate Contacts Jounce Bumper Bracket on Side Rail (Install New U-Bolts and Anchor Plate)

Models:
1995 Chevrolet G3 Van - Built Prior to VIN Breakpoint SF175169
1995 GMC Truck G3 Van - Built Prior to VIN Breakpoint SF529744 
with 3.73 Ratio Axle (RPO GT4)

CONDITION
Some owners may comment about a loud noise coming from the rear when going over bumps. This noise may be attributed to the rear leaf spring U-bolt
anchor plate contacting the jounce bumper bracket located on the frame rail.

CAUSE
Build variation and tolerance stack-ups between the anchor plate and jounce bumper bracket clearances, causing a metal-to-metal contact point.

CORRECTION

Install a current set of U-bolts and anchor plate (currently used on G3 van models with 4.56 ratio axles RPO HC4). The installation of this set of

Rear Suspension - Loud Noise On Bumps|Page 9184 > < Rear Suspension - Loud Noise On Bumps|Page 9178