K 1500 Suburban 4WD V8-393 6.5L DSL Turbo (1994)
7.
Remove the pinion stop retaining ring first prying the pinion stop collar off the ring. Pry the pinion stop ring off of the armature with a small screw
driver. Discard ring.
8.
Remove pinion stop collar from armature shaft. Discard collar.
9.
Install new pinion stop collar on armature shaft. Flat side goes towards pinion.
10. Install new retaining ring onto armature shaft and seat it in the shaft groove. Use due care not to damage the armature shaft.
11. Install thrust collar onto armature shaft with small flange toward retaining ring. Use two pliers to squeeze pinion stop collar and the thrust collar to
seat the stop collar on the retaining ring.
12. Assemble the frame, armature, and drive assembly into the housing. Ensure the shift lever is engaged with the drive assembly. Ensure the armature
shaft is engaged with the housing bearing. Tighten the through bolts.
13. Install starter field lead to solenoid.
PARTS INFORMATION
General motors service parts operation (GMSPO) has limited quantaties of parts which are in merchandised packages of 10 pieces each. Please use VIP
CIO order form and do not over order to insure availability to all vehicles involved.
Insure that removed parts are disposed of to prevent potential reuse.
WARRANTY INFORMATION
List one applicable labor operation. A separate repair order must be used for each vehicle. A complete warranty claim is to be kept as a permanent record
of completion.
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this product campaign bulletin will require a "campaign identification label". Each
label provides a space to include the campaign number and five (5) digit dealer code of the dealer performing the campaign service. This information
may be inserted with a typewriter or ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean, dry surface.
ADMINISTRATIVE PROCEDURE
Procedures covering this campaign are outlined in section V of your dealership's "GMC Truck Warranty Claims Processing Manual" # P9119.
