K 1500 Suburban 4WD V8-393 6.5L DSL Turbo (1994)
Turn Signal Switch Removal Preparation
9. Turn signal to "RIGHT TURN" position (up).
10. Multi-function lever and hazard knob assembly.
11. Screw (10) and signal switch arm (11).
12. Turn signal switch screws (9).
Removing Turn Signal Switch
13. Turn signal switch assembly (12).
^
Let switch hang freely if removal is not needed.
^
To remove switch (12):
A. Hex head bolts (84).
B. Steering column support bracket assembly (83).
C. Turn signal switch connector from vehicle wire harness.
D. Wiring protectors (27) and (28).
E. Gently pull wire harness through column.
14. Key from steering column lock cylinder set (20).
15. Buzzer switch assembly (16).
16. Reinsert key in lock cylinder (20).
^
Key in "LOCK" position.
17. Lock retaining screw (18).
18. Lock cylinder (20).
INSTALL OR CONNECT
