K 1500 Suburban 4WD V8-393 6.5L DSL Turbo VIN S (1996)
Blower Motor Switch: Service and Repair
W/O Air Conditioning
Front Unit
Control Assembly Replacment
Remove or Disconnect
1. Instrument cluster trim plate.
2. Control assembly by releasing the snap-fit retainers with a small screwdriver.
3. Electrical connection.
4. Cables from the control assembly by releasing retainers.
5. Blower switch.
Remove the blower switch rotary knob and the retaining clip from the shaft of the blower switch.
Install or Connect
1. Blower switch.
A. Hold the blower switch in position and install the retaining clip.
B. Install the blower switch rotary knob.
2. Cables to the control assembly.
3. Electrical connection.
4. Control assembly to the instrument panel by snapping in.
5. Instrument cluster trim plate.
Check circuit operation.
Auxiliary Unit
Auxiliary Heater Control Switch
Remove or Disconnect
1. Instrument cluster trim.
2. Electrical connectors.
3. Control switch from instrument cluster trim.
