K 1500 Suburban 4WD V8-5.7L VIN R (1997)
6. Using a wheel puller, remove the rotor assembly.
7. Inspect all of the parts. Replace the parts as necessary.
INSTALLATION PROCEDURE
Hub, Knuckle, And Control Arm Components
1. Install the hub/rotor to the hub and bearing assembly.
2. Install the rotor and hub assembly to the axle.
^
Tighten the bolts to 180 Nm (133 ft. lbs.).
^
Tighten the nut to 225-235 Nm (165-173 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the brake caliper.
4. Install the tire and wheel assembly.
