K 1500 Suburban 4WD V8-5.7L VIN R (1997)
Engine Front Cover: Service and Repair
Replacement, Engine Overhaul
REMOVAL
1. Remove the engine front cover bolts.
NOTE: Do not reuse the composite front cover and gasket. A new front cover and gasket must be used.
2. Remove the engine front cover and gasket.
INSTALLATION
1. Lubricate the crankshaft front oil seal surface with clean engine oil.
NOTE: Do not attempt to reuse the composite engine front cover and gasket. You must Install a new cover and gasket.
2. Install the engine front cover and gasket.
3. Install the engine front cover bolts.
-
Tighten the engine front cover bolts to 12 Nm (106 inch lbs.).