K 1500 Suburban 4WD V8-5.7L VIN R (1997)
Catalytic Converter: Service and Repair
Below 8600 LBS. GVWR
REMOVE OR DISCONNECT
^
Raise and support the vehicle.
1. Oxygen sensor electrical connection(s).
2. Nuts and flange gaskets from Y-pipe and exhaust manifold.
3. Nuts and washers from Y-pipe flat flange.
4. Y-pipe and catalytic converter assembly.
INSTALL OR CONNECT
^
Position Y-pipe and catalytic converter assembly to flat flange.
1. Washers and nuts to flat flange studs.
^
Tighten nuts to 48 Nm (35 ft. lbs.).
2. Flange gaskets and nuts to exhaust manifold.
^
Tighten nuts to 65 Nm (48 ft. lbs.).
3. Oxygen sensor electrical connection(s).
^
Check for clearance and alignment.
^
Lower the vehicle.