K 1500 Suburban 4WD V8-5.7L VIN R (1997)
Tighten
-
Hose assembly to 24 Nm (18 lb ft).
3. New O-ring seal to condenser hose.
-
Coat O-ring seal with 525 viscosity refrigerant oil.
4. Hose assembly to condenser.
Tighten
-
Hose assembly to 24 Nm (18 lb ft).
5. New O-ring seals to accumulator hose.
-
Coat O-ring seal with 525 viscosity refrigerant oil.
6. Hose assembly to accumulator.
Tighten
-
Hose assembly to 24 Nm (18 lb ft).
7. Sealing washers.
8. Hose assembly to top of the compressor.
9. Bolt.
Tighten
-
Bolt to 34 Nm (25 lb ft).
10. Charge system.
-
Check system for leaks.
Rear Auxiliary Hoses
Auxiliary Condenser Hose Routing