K 1500 Truck 4WD V8-350 5.7L (1986)
Control Assembly: Service and Repair
Control Assembly
Control Assembly
REMOVE OR DISCONNECT
1. Battery ground cable.
2. Instrument panel bezel.
3. Bowden cables.
4. Blower switch wiring harness.
5. Assembly through the opening above the control.
INSTALL OR CONNECT
NOTE: If a new unit is being installed. Transfer the blower switch to the new unit.
1. Assembly through the opening above the control.
2. Blower switch wiring harness.
3. Bowden cables.
4. Instrument panel bezel.
5. Battery ground cable.
