K 1500 Truck 4WD V8-393 6.5L DSL (1994)
Removing Dimmer & Ignition Switch Assemblies
1. Negative (-) battery cable.
2. Washer head screw (44).
3. Hexagon nut (42).
4. Dimmer switch assembly (43) from rod (45).
5. Dimmer & ignition switch mounting stud (46).
6. Ignition switch assembly (41) from ignition switch actuator rod (21).
7. Vehicle wire harness from ignition switch (41).
INSTALL OR CONNECT
Adjusting Ignition Switch
Adjusting Dimmer Switch
NOTICE: Ensure all fasteners are securely seated before applying needed torque. Failure to do so may result in component damage or
malfunctioning of steering column.
NOTICE: Install ignition switch (41) to jacket (40) with switch in "OFF-LOCK" position. New ignition switch will be pinned in "OFF-LOCK"
position. Remove plastic pin after switch is assembled to column. Failure to do so may cause switch damage.
1. Ignition switch assembly (41) to ignition switch actuator rod (21).
