K 1500 Truck 4WD V8-393 6.5L DSL (1994)
Removing Buzzer Switch
14. Buzzer switch assembly (13).
15. Reinsert key in lock cylinder (18). Key in "LOCK" position.
16. Lock retaining screw (15).
Removing Lock Cylinder Set
17. Lock cylinder set (18).
INSTALL OR CONNECT
NOTICE: Ensure all fasteners are securely seated before applying needed torque. Failure to do may result in component damage or malfunctioning
of steering column.
1. Lock cylinder set (18).
2. Lock retaining screw (15).
TIGHTEN
^
Tighten screw (15) to 4.5 Nm (40 lb.in.).
3. Key from lock cylinder set (18).
4. Buzzer switch assembly (13).
5. Reinsert key in lock cylinder set (18).
^
Key in "LOCK" position.
6. Turn signal switch assembly (10) wire harness through steering column.
A. Let switch hang freely.
B. Switch connector to vehicle wire harness.
C. Wiring protectors (33) and (34).
D. Support bracket (52).
E. Hex head bolts (53).
TIGHTEN
^
Tighten bolts (53) to 30.0 Nm (22 lb.ft.).
7. Turn signal switch assembly (10) and screws (7).
TIGHTEN
^
Tighten screws (7) to 3.4 Nm (30 lb.in.).
