K 1500 Truck 4WD V8-393 6.5L DSL (1994)
B. Position switch on column and push against dimmer switch rod (45) to remove all lash.
C. Remove drill bit.
TIGHTEN
^
Tighten screw (44) and nut (42) to 4.0 Nm (35 lb.in.).
17. Do all steps, "INSTALL OR CONNECT", for "UPPER COLUMN".
Ignition Lock Cylinder & Upper Column Components - Column Shift
UPPER COLUMN
INCLUDES:
SHAFT LOCK
TURN SIGNAL CANCELLING CAM ASM
UPPER BEARING SPRING
UPPER BEARING INNER RACE SEAT
INNER RACE
TURN SIGNAL SWITCH ASSEMBLY
BUZZER SWITCH ASSEMBLY
STRG COL LOCK CYLINDER SET
TOOLS REQUIRED:
^
J 23653-C Lock Plate Compressor
IMPORTANT
^
Before doing any service procedures in this section, removal of Steering Wheel is needed.
REMOVE OR DISCONNECT
