K 1500 Truck 4WD V8-393 6.5L DSL Turbo VIN S (1996)
Clutch Coil Assembly Removal
5. Mark clutch coil terminal location on compressor front head.
6. Install J 33023-A puller pilot on front head of compressor. Also install J 8433-1 pull crossbar with J 33025 puller legs as shown.
7. Tighten J 8433-3 forcing screw against the puller pilot remove the clutch coil.
Install or Connect
1. Place the clutch coil assembly on the front head with the terminals positioned at the "marked" location.
2. Place the J 33024 clutch coil installer over the internal opening of the clutch coil housing and align install with the compressor front head.
Installing Clutch Coil Assembly
3. Center the J 8433-1 puller crossbar in the counter-sunk center hole of the J 33024 clutch coil installer. Install J 33026-2 through bolts and washers
through the crossbar slots and thread them into the holding fixture J 33026 to full fixture thickness.
4. Turn the center forcing screw of the J 8433-1 pull crossbar to force the clutch coil onto the front head. Be sure clutch coil and J 33024 installer
stay "in-line during installation.
