gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Center Support|Description and Operation|Page 6652
Page 1
background image

Drive/Propeller Shaft: Customer Interest
Drive Line - Shudder When Accelerating From a Stop

File In Section: 3 - Steering Suspension

Bulletin No.: 66-30-01

Date: August, 1996

Subject: 
Drive Line Shudder when Accelerating from a Stop 
(Replace Rear Springs and U-Bolts)

Models: 
1994-96 Chevrolet and GMC K1, Extended Cab, 8 FL. Box Models with Turbo Diesel Engine (VIN S - RPO L56)

Condition

Some customers may report a drive line shudder when accelerating from a stop.

Cause

The prop shaft slip yoke splines lock due to rear spring wind up.

Correction

Stiffer (higher load rated) rear springs will help to resist the wind up affect. Replace the rear springs and U-bolts with the parts listed below.

Service Procedure

Replace the leaf springs as described in Section 3D, Rear Suspension, of the appropriate year C/K Truck Service Manual.

Important

Do not reuse the original U-bolts.

Parts Information

P/N

Description

Qty.

15659739

Rear Spring

2

15529595

U-Bolts

4

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Labor Op

Description

Labor Time

Spring Assembly,

Use Published

E5137

Hear Leaf Replace

Labor Operation

(both)

Time

Important

Labor operation is coded to base vehicle coverage in the warranty system.

All Technical Service Bulletins: > < Center Support|Description and Operation|Page 6652