K 1500 Truck 4WD V8-393 6.5L DSL Turbo VIN S (1996)
4. Wheel speed sensor wire support bracket from upper control arm to allow extra travel of knuckle (all models). Also remove wire and brake line
support brackets from knuckle on 8600# and heavier GVWR.
5. Prevailing torque nut from outer tie rod. Do not reuse the nut.
6. Separate the outer tie rod ball stud from the steering knuckle using J 24319-B.
NOTICE: Do not disengage the joint by driving a wedge-type tool between the joint and the knuckle. This may cause seal damage.