K 1500 Truck 4WD V8-393 6.5L DSL VIN P (1995)
Install or Connect (Figures 1, 2 and 5)
1.
Ball joint to the control arm.
2.
Bolts and nuts to the ball joint. Tighten nuts to 60 N.m (45 lb ft).
3.
Ball joint into the steering knuckle.
4.
Stud nut onto the stud. Tighten nut to 128 N.m (94 lb ft) and align the slot in the stud nut with hole in the stud by tightening.
5.
New cotter pin to the stud.
6.
Drive axle (halfshaft).
7.
Brake caliper.
8.
Tire and wheel assembly.
9.
Lower the vehicle.
Important:
Check the front wheel alignment. Refer to SECTION 3A.
