K 1500 Truck 4WD V8-4.8L VIN V (1999)
Front Door Handle Switch: Service and Repair
Power Accessory Switch Panel
Removal Procedure
1. Use a flat blade tool in order to carefully pry the door accessory mounting panel from the door trim panel.
Clip location is indicated by screwdriver slots in the mounting panel.
2. Remove the switch mounting panel.
3. Disconnect the power accessory electrical connectors from the switches and the speaker, as necessary.
Installation Procedure
1. Connect the power accessory electrical connectors to the switches as necessary.
2. Snap the switch mounting panel in place.
