K 1500 Truck 4WD V8-4.8L VIN V (1999)
Power Door Lock Switch: Service and Repair
Power Door Lock Switch Replacement
Removal Procedure
1. Remove the power accessory switch plate.
2. Disconnect the wiring connector.
3. Remove the screws.
4. Remove the switch from the switch plate by lifting the rear of the switch assembly and sliding the switch out form the accessory switch panel.
Installation Procedure
1. Install the power door lock switch to the switch plate, sliding the tabs in first. Rock the switch down in order to seat the door lock switch
completely.
2. Install the screws.
3. Connect the wiring connector.
4. Install the power accessory switch plate.