K 1500 Truck 4WD V8-4.8L VIN V (1999)
3.
When service is complete and before the wheel is installed, perform visual inspection to insure that the white mark is properly lined up with the
knuckle attachment bracket. After the wheel is installed, inspect the clearance between the brake hose and wheel. There must be at least 5 mm
(.1875 in) clearance between the brake hose and wheel.
If the brake hose is not within the clearance specification, push the hose through the knuckle attachment bracket in the opposite direction. This will
draw the brake hose further away from the wheel.
