K 1500 Truck 4WD V8-4.8L VIN V (1999)
Ensure that you do not damage the condenser.
11. Remove the condenser.
INSTALLATION PROCEDURE
1. Install the condenser.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the condenser mounting bolts.
Tighten
Tighten the bolts to 9 N.m (80 lb in).
3. Install the power steering cooler to the radiator support brackets.
4. Install the hood latch support to upper radiator support bolts.
Tighten
Tighten the bolts to 9 N.m (80 lb in).
5. Install the upper tan shroud.
6. Install the evaporator pipe to the condenser.