K 1500 Truck 4WD V8-4.8L VIN V (1999)
Ignition Coil: Service and Repair
Ignition Coil And ICM Replacement
REMOVAL PROCEDURE
1. Remove the air cleaner assembly (2) and nut (1).
2. Disconnect the electrical connectors.
3. Remove the ignition coil wire from the distributor.
4. Remove the studs holding the bracket and the ignition coil to the intake manifold.
5. Remove the bracket and the ignition coil.
6. Drill and punch out the 2 rivets holding the ignition coil to the bracket.
7. Remove the ignition coil from the bracket.
INSTALLATION PROCEDURE
A replacement ignition coil kit comes with 2 screws in order to attach the ignition coil to the bracket.
