gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

PCM - Lean Hesitation/Sag/Stumble on Acceleration|Page 7291 > < PCM/BCM Replacement - DTC's B001/B1271/B1780 Set
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
PCM - Lean Hesitation/Sag/Stumble on Acceleration

File In Section: 06 - Engine/Propulsion System 

Bulletin No.: 01-06-04-006

Date: February, 2001

TECHNICAL

Subject:
Lean Hesitation, Sag or Stumble On Light/Moderate Acceleration 
(Reprogram PCM)

Models:
1999 Chevrolet and GMC C/K Pickup Models (Silverado, Sierra)
with 4.8 L, 5.3 L or 6.0 L V8 Engine (VINS V, T, U - RPOs LR4, LM7, LQ4)

Condition

Some customers may comment on the following condition:

A lean hesitation, sag or stumble present during light to moderate accelerations.

^

Usually only present on the first one or two accelerations.

^

The condition occurs when the coolant temperature is between -6°C and +21 °C (20°F and 70°F).

^

Fuels with a high drivability index can also be a contributor.

Calibration Information

The Calibrations shown are electronic calibrations and are NOT available from GMSPO. Calibrations will be available from Techline starting November
2000, on the TIS 2000 version 19.5 TIS 00/2000 data update or later.

Cause

Calibrations not optimized for various operating parameters.

Correction

Verify that the drivability condition is not the result of an inoperative component, or a related wiring/other condition.

Warranty Information

For vehicles repaired under warranty use table as shown.

PCM - Lean Hesitation/Sag/Stumble on Acceleration|Page 7291 > < PCM/BCM Replacement - DTC's B001/B1271/B1780 Set