gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Engine - Whirling Sound From Lower Rear|Page 4264 > < Engine - Whirling Sound From Lower Rear|Page 4258
Page 1
background image

Crankshaft Position Sensor: All Technical Service Bulletins
Engine - Whirling Sound From Lower Rear

Bulletin No.: 
00-06-01-001

File In Section: 
06 - Engine/Propulsion System

Date: 
February, 2000

Subject: 
Engine Noise (Check/Replace Crankshaft Position Sensor)

Models: 
1999 Chevrolet and GMC C/K Models (Silverado and Sierra) with 4.8 L or 5.3 L V8 Engine (VINs V, T - RPOs LR4, LM7) Built within the VIN
breakpoints shown in image.

Condition

Some customers may comment on a whirling sound from the lower rear side of the engine. This occurs as the engine warms up, between 1500 and 2000
engine RPM. The sound may not be present on a cold engine.

Cause

The crankshaft position sensor may be making contact with the reluctor ring.

Correction

IMPORTANT: 

Dealers may encounter a few vehicles, shipped from the vehicle assembly plants, which have a 2nd rubber 0-ring installed over the crankshaft
position sensor, and a copper shim under the mounting tab.

Engine - Whirling Sound From Lower Rear|Page 4264 > < Engine - Whirling Sound From Lower Rear|Page 4258