K 1500 Truck 4WD V8-4.8L VIN V (1999)
6. Remove the nut from the back of the generator.
7. Remove the positive battery cable from the generator.
8. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
9. Remove the bolts (4) securing the positive cable to the engine.
10. Remove the positive cable from the power steering accessory bracket (4WD 15 series).
11. Remove the nut from the positive terminal of the starter.
12. Remove the positive battery cable from the starter.
13. Remove the positive battery cable from the retention clip.
14. Remove the positive battery cable.
INSTALLATION PROCEDURE
