K 1500 Truck 4WD V8-4.8L VIN V (1999)
Power Steering Bleeding: Service and Repair
BLEEDING POWER STEERING SYSTEM BLEED PROCEDURE
-
Tools Required
-
J 35555 Mity Vac
-
J 43485 Power Steering Bleeder Adapter
-
Bleed the steering system for the following reasons:
-
Components replaced
-
Fluid line disconnected
-
Steering system noise occurs
-
Prevention of pump damage
-
Proper system operation
IMPORTANT: Use clean, new power steering fluid type only.
IMPORTANT: Hoses touching the frame, body or engine can cause system noise.
-
The hoses must not touch any other part of the vehicle.
IMPORTANT: Loose connections may not leak, but could allow air into the steering system.
-
Verify that all hose connections are tight.