K 1500 Truck 4WD V8-4.8L VIN V (1999)
-
Remove the pitman arm from the steering gear. Refer to Rack Piston and Worm Shaft Replacement - Off Vehicle (670 Gear).
-
Remove the pitman shaft and side cover. Refer to Steering Gear Pitman Shaft and Housing Cover Replacement - Off Vehicle (670 Gear).
-
Clean the exposed end of the pitman shaft.
-
Use a wire brush to clean the pitman shaft splines.
-
Clean the steering gear housing.
-
Remove the pitman shaft boot (3) from the steering gear housing (1).
-
Remove the pitman shaft retaining ring (2) from the steering gear housing (1) using J 4245
-
Remove the backup washer (3) from the steering gear housing (1).
-
Pry the pitman shaft seal (2) from the steering gear housing (1) using a screwdriver.