K 1500 Truck 4WD V8-4.8L VIN V (1999)
1. Slide the shock dampener (2) forward onto the rack (1).
2. Apply Loctite 262 (or equivalent) to the inner tie rod threads.
IMPORTANT: Threads must be clean prior to Loctite application. Check Loctite (or equivalent container for expiration date. Use only enough
Loctite to evenly coat threads.
3. Attach the inner tie rod (6) on the rack (1) as follows:
3.1.
Place a wrench on the flats of the rack assembly (3).
3.2.
Place a torque wrench (5) on the flats of the inner tie rod housing (4).
NOTICE: Refer to Fastener Notice in Service Precautions
-
Tighten the inner tie rod to 100 Nm (74 ft. lbs.).
4. Place the inner tie rod assembly (2) in a vise.
5. Stake both sides of the inner tie rod assembly to the flats on the rack (1).
