K 1500 Truck 4WD V8-4.8L VIN V (1999)
1. Clean all corrosion or contaminates from the steering knuckle bore and the hub and bearing assembly.
2. Install the O-ring to the steering knuckle (25 Series).
3. Lubricate the steering knuckle bore with wheel bearing grease or the equivalent.
4. Install the hub and bearing assembly.
5. Install the hub and bearing assembly mounting bolts (15 Series).
Install the hub and bearing assembly mounting bolts (25 Series).
NOTICE: Refer to Fastener Notice in Service Precautions.
^
Tighten the hub to knuckle bolts to 180 Nm (133 ft. lbs.).
6. Disengage the front drive halfshaft assembly.
7. Connect the electrical connection for the wheel speed sensor.
8. Install the wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle.
^
Tighten the bolt to 12 Nm (106 inch lbs.).
9. Install the rotor.
10. Install the tire and wheel assembly.
11. Remove the safety stands.
12. Lower the vehicle.
