K 1500 Truck 4WD V8-4.8L VIN V (1999)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft Replacement - Two-Piece
Removal Procedure
^
Tools Required
0
J 43218 Clamp Plier
1. Raise the vehicle on a hoist. Refer to Vehicle Lifting.
Important: Observe and accurately reference mark all driveline components relative to the propeller shaft and axles before disassembly. These
components include the propeller shafts, the drive axles, the pinion flanges, the output shafts, etc. All components must be reassembled in the exact
relationship to each other as they were when removed. In addition, published specifications and torque values, as well as any measurements made
prior to disassembly must be followed.
2. Reference mark the propeller shaft (3) to the pinion flange connection (4).
3. Reference mark the slip yoke (2) to the transmission (1) or the transfer case.
