K 1500 Truck 4WD V8-4.8L VIN V (1999)
4. Remove the bolts (1) and the yoke retainers (2) from the rear axle pinion flange (4).
5. For 2 piece Dana propeller shafts, remove the clamps (2) securing the boot (3) to the slip yoke (1) and the stub shaft (4), using a screwdriver.
6. Slide the propeller shaft (3) forward in order to remove the propeller shaft from the rear axle pinion flange (4).
7. Slide the propeller shaft (2) rearward in order to remove the propeller shaft (2) from the transmission or the transfer case.
8. Remove the propeller shaft from the vehicle.
9. Remove the boot from the propeller shaft.
