K 1500 Truck 4WD V8-4.8L VIN V (1999)
18.
Install the following components:
18.1 The shift shaft detent plunger.
18.2. The shift shaft detent spring.
Important:
Apply pipe sealant, P/N 12346004 (in Canada use P/N 10953480), or equivalent to the detent plug.
18.3. The shift shaft detent plug.
19.
If RWD vehicle, coat the speed sensor 0-ring with Synchromesh Transmission Fluid, P/N 12345349 (in Canada use P/N 10953465), or equivalent.
20.
Install the speed sensor, 0-ring, and bolt.
Tighten
Tighten the bolt to 16 Nm (12 lb ft).
