K 1500 Truck 4WD V8-454 7.4L (1988)
FIGURE 1 - HIGH BACK SEAT BELT COMPONENTS - SUBURBAN
SERVICE PROCEDURE
Remove or Disconnect (Figure 1)
1.
Upper seat belt anchor plate cover (42).
^
Pry the top of the cover away from anchor plate.
2.
Anchor plate bolt (36).
3.
Anchor plate (35).
4.
Retractor (44) to floor bolt (47).
5.
Retractor (44) from vehicle.
6.
Plug (51).
7.
Buckle (43) to floor bolt (50).
8.
Seat belt wire (41) (left side only).
9.
Buckle (43) from floor. Install or Connect (Figure 1)
1.
Buckle (43) to floor.
2.
Seat belt wire (41) (left side only).
3.
Buckle (43) to floor bolt (50). Tighten
^
Bolt (50) to 50 N-m (37 ft.lbs.)
4.
Plug (51).
5.
Retractor (44) to the vehicle.
6.
Retractor (44) to floor belt (47). Tighten
^
Bolt to 50 N-m (37 ft.lbs.)
7.
Anchor plate (35).
8.
Anchor plate bolt (36). Tighten
^
Bolt to 50 N-m (37 ft.lbs.)
9.
Upper seat belt anchor plate cover (42).
PARTS INFORMATION
Parts are to be obtained from General Motors Service Parts Operation (GMSPO). To ensure that these parts will be obtained as soon as possible, they
should be ordered from GMSPO on a C.I.O. order with no special instruction code, but order on an advise code (2).
Part Number
Description
Quantity
15583507
Driver's Front Seat
1
Belt Assembly (Gray)
WARRANTY INFORMATION
Dealers should submit an accurately filled out Warranty Repair Order on each vehicle completed under this campaign.
