K 1500 Truck 4WD V8-5.3L VIN T (2000)
6. Drill a 13 mm (1/2 in) hole at the pilot locations.
Important: Prior to refinishing, refer to GM 4901MD-98 Refinish Manual for recommended products. Do not combine paint systems. Refer to
paint manufacturer's recommendations.
7. Clean and prepare all of the bare metal surfaces.
8. Apply approved anti-corrosion primer.
9. Apply full-bodied caulk to the entire hinge mounting surface in order to ensure a proper seal.
10. Align the hinge (1) and the backing plate (4) with the holes in the door (2).
Notice: Refer to Fastener Notice in Service Precautions.
11. Install the bolts (3).
Tighten the bolts to 25 N.m (18 lb ft).
12. Apply the sealers.
13. Refinish the metal surfaces as necessary.
14. Install and align all of the related panels and the components.
