K 1500 Truck 4WD V8-5.3L VIN T (2000)
8. Align the hinge with the holes in the pillar.
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the hinge fasteners.
Torque the bolts to 25 N.m (18 lb ft).
10. Position the rear body opening lower filler and mig weld in place at factory weld locations.
11. Clean and prepare all weld surfaces.
12. Refinish the metal surfaces as necessary.
13. Align and install all of the related panels and the components.