K 1500 Truck 4WD V8-5.3L VIN T (2000)
Removal Procedure
1. Remove the hinge pillars.
2. Remove the door sill plates.
3. Remove the seats.
4. Remove the floor storage console.
5. Remove the floor console bracket.
6. Remove the shift handle and boot, if equipped.
7. Remove the jack assembly.
8. Remove the quarter trim panel..
9. Remove the instrument panel (I/P) supporting post lower bolt.
10. Remove the carpet from the vehicle.
Installation Procedure
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material
size as the original installation. Always return the carpet to the original location.
1. Install the carpet to the vehicle.
2. Install the I/P supporting post lower bolt.
3. Install the quarter trim panel.
4. Install the jack assembly.
5. Install the shift handle and boot, if equipped.
6. Install the floor console bracket.
7. Install the floor storage console.
8. Install the seats.
9. Install the door sill plates.
10. Install the hinge pillars.
