K 1500 Truck 4WD V8-5.3L VIN T (2000)
Removal Procedure
1. If equipped, remove the screws that retain the molding to the vehicle.
2. Remove the rear window upper garnish molding from the roof panel.
Slide the nylon slipstick, or the equivalent, between the roof panel and the garnish molding near the clips.
3. Pull the rear window upper garnish molding downward while performing the previous step.
Installation Procedure
1. Install the rear window upper garnish molding to the rear body panel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the retainer screws, if equipped.
Tighten the rear window upper garnish molding screws to 2 N.m (18 lb in).
Rear Window Upper Molding Replacement (Pickup, Extended, Crew Cab)
Rear Window Upper Molding Replacement (Pickup, Extended, Crew Cab)
Removal Procedure
1. If equipped, remove the screws that retain the rear window upper garnish molding to the vehicle.
