K 1500 Truck 4WD V8-5.3L VIN T (2000)
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the front nuts (2) onto the studs on the underside of the cushion.
Tighten the front nuts to 21 N.m (15 lb ft).
10. Feed the seat belt through the seat cushion.
11. Install the outboard seat belt anchor nut.
Tighten the outboard seat belt anchor nut to 53 N.m (39 lb ft).
12. Install the seat trim panel.
13. Install the seat into the vehicle.
