K 1500 Truck 4WD V8-5.3L VIN T (2000)
1. Remove the heater/ventilation module.
2. Remove the floor air outlet screws.
3. Remove the floor air outlet (1).
INSTALLATION PROCEDURE
1. Install the floor air outlet.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the floor air outlet screws (1).
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
3. Install the heater/ventilation module.
Center
REMOVAL PROCEDURE
1. Remove the instrument panel (IP) bezel.
2. Remove the air outlet mounting screw.
3. Remove the air outlet.
INSTALLATION PROCEDURE
