K 1500 Truck 4WD V8-5.3L VIN T (2000)
If the J 33017 slips off direct in-line contact with the inner race of the bearing, perform the following steps:
13.1. Loosen the J 8433-3.
13.2. Realign the installer and the pilot in order to ensure that the J 33017 properly clears the front head.
14. Use the snap ring pliers in order to install the following components:
15. The pulley rotor (1)
16. The retaining ring (2)
17. Install the clutch plate and hub assembly.
