K 1500 Truck 4WD V8-5.3L VIN T (2000)
21. Install the engine sight shield mounting bracket and the bolts.
Tighten
Tighten the bolts to 10 N.m (89 lb in)
22. Tighten the fuel filler cap.
23. Connect the negative battery cable.
24. Inspect for leaks.
24.1. Turn the ignition ON for 2 seconds.
24.2. Turn the ignition OFF for 10 seconds.
24.3. Turn the ignition ON.
24.4. Inspect for fuel leaks.
25. Install the engine sight shield.
Tighten
Tighten the bolts to 10 N.m (89 lb in)