K 1500 Truck 4WD V8-5.3L VIN T (2000)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Removal Procedure
1. Remove the power steering pulley.
2. Place a drain pan under the pump.
3. Remove the hose guide bracket from the front of the pump.
4. For vehicles with variable effort steering, disconnect the electrical connector.
5. Remove the hoses from pump.
6. Remove the lower intermediate shaft from the steering gear.
7. Remove the bolt retaining the rear bracket to the engine.
8. Remove the bolts from the front of the pump.
9. Remove the pump from the vehicle.
10. Remove the bracket (3) from the rear of the pump (1).
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.