K 1500 Truck 4WD V8-5.3L VIN T (2000)
10. Remove the rack and pinion assembly mounting nuts (1), the washers (2) and the bolts (4).
11. Remove the rack and pinion assembly (3) from the vehicle.
Installation Procedure
1. Install the rack and pinion assembly (3) into the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the rack and pinion assembly mounting bolts (4), the washers (2) and the nuts (1).
-
Tighten the nuts to 185 Nm (136 ft. lbs.).
3. Install the intermediate shaft to the rack and pinion assembly.