K 1500 Truck 4WD V8-5.3L VIN T (2000)
14. Remove the 3-4 accumulator piston oil ring seal from the 3-4 accumulator piston (2).
15. Remove the remaining control valve body if required. Refer to Valve Body.
Installation Procedure
^
Tools Required
-
J 25025-5 Guide Pin Set
-
J 36850 Transjel Transmission Assembly Lubricant
1. Ensure the upper half of the control valve body is installed. Refer to Valve Body.
2. Install the 3-4 accumulator piston oil ring seal (1) onto the 3-4 accumulator piston (2).
3. Install the 3-4 accumulator pin (4) into the valve body (3).
4. Install the 3-4 accumulator piston (2) onto the pin (4).