K 1500 Truck 4WD V8-5.3L VIN T (2000)
Tighten the bolts to 11 Nm (8 ft. lbs.).
12. Install the 1-2 accumulator piston oil ring seal (1) onto the 1-2 accumulator piston (2).
13. Install the 1-2 accumulator inner (3) and outer (2) springs into the accumulator housing (4).
14. Install the 1-2 accumulator piston (1).
15. Install the 1-2 accumulator cover and the cover bolts.
Tighten the bolts to 11 Nm (8 ft. lbs.).
16. Remove the J 25025-5 from the valve body.
17. Install the remainder of the valve body. Refer to Valve Body.
Accumulator Assembly